FMTData offers the ability to mass import vehicles into FMTData to help you save time and resources.

Importing is extremely beneficial when you have to update multiple assets at a time.

Before Importing Your File

Before you import new assets into FMTData, you must make sure you meet the below requirements;

• You import the file in a Comma Separated Value (CSV) format.
• You only import one authorisation type (NFC FOBs, SmartTags, Codes, etc). If you need to import multiple types, separate them into different files.

Importing into FMTData

In this article, we will use Vehicles as an example. However, the procedures shown are identical between Drivers and Plants.

Click on Configure Vehicles.

On the new pop-up window, click Import Vehicles.

Select the file you want to import into the system, and select Import.

If your CSV file contains assets that already exist inside FMTData, ensure that Update existing items is enabled if you wish to update those assets with new details.

On the Import Vehicles page, you'll need to;

• Select what columns FMTData will recognise (Highlighted Red).
• Select the header row, so that it is ignored during Import (Highlighted Blue)
• Select the authorisation type at the bottom of the screen (Highlighted Green)

If you leave a column as Unused, that column will be ignored, and will use the data it had previously (or left blank if it's a brand new asset).

Press the Import button, and FMTData will upload the data into the web portal

If any error messages appear after the import, you may need to check if your CSV file is correctly configured. If you're not too sure what could be happening, reach out to our support team with the CSV file attached.

Vehicles and Plants are used in SmartFill to identify the vehicle or machinery being filled at the SmartFill system.

The functionality of the Vehicles & Plants page is identical; the Vehicles asset type is often used for Light Vehicles (LVs), such as passenger cars, whilst Plants are used for Heavy Vehicles/Machinery (HVs), such as Forklifts or Dump Trucks.

On the SmartFill system, you can only use a Vehicle or Plant authentication, not both simultaneously.

Adding a Vehicle / Plant

First, navigate to your Vehicles or Plant module on the left-hand side of the website.

If you cannot find a Vehicles or Plant module, you'll need to add the desired module to do so. You can learn how to do that here.

When you have loaded into the new Vehicle or Plant page, click Add Vehicle or Add Plant in the top right of the web portal.

You will then be prompted to add the Vehicle's details in a new window. By default, we offer the following inputs;

• Input Type: The authorisation method that SmartFill will recognise at the system.
• Key / Code: The authorisation code that SmartFill will need to identify at the system.
• Description: A description for the Asset, used to identify during reconcillation.
• Registration: The registration of the Vehicle/Plant.

If you need to add more details for your Vehicle/Plant, learn how to add more columns to your assets.

Once your asset has been configured, press Add to confirm, and the asset will be added to the system.

While the system is offline, no data will be lost, and will be uploaded once the system is back online. 

Your system will continue to operate as expected and will not be down during the period it's offline.

Your SmartFill being offline can depend on several factors, which are different from a customer-by-customer basis.

This article covers how to troubleshoot and diagnose the unit being offline.

If you urgently need data from the SmartFill system, follow this article on how to export data via USB.

Remote Troubleshooting

First, the best thing to do is to check your unit page for the status and model number of the unit. Take note of the last character of the model number.

Using the table below, you may be able to diagnose what your potential issue could be.

* 3G has been sunset in most parts of the world. Please check with your telecommunication services if 3G is still available in your area.

** Required for modules that only support 3G in areas where 3G is no longer available.

For 3G/4G users, check if your SIM Card is still active, and has any remaining data. If not, see if recharging your SIM or swapping the SIM for a new one fixes the issue.

For Wi-Fi users, check if any network settings have changed, such as a new password, new SSiD, or upgrading from 2.4Ghz to 5Ghz. If so, you may need to change the configuration on SmartFill.

For Ethernet users, check if you can ping the system through your network. If you're using a third-party modem, check if it is active and has no issues.

Drivers are used in SmartFill to quickly identify the user who authorised a dispense at the system. 

They can be used by themselves or paired with a Vehicle or Plant authorisation to capture the vehicle the driver is filling.

Adding Drivers

First, navigate to your Drivers module on the left-hand side of the website.

If you cannot find the Drivers option, you'll need to add the desired module to do so. You can learn how to do that here.

When you have loaded into the new Drivers page, click Add Driver in the top right of the web portal.

You will then be prompted to add the Drivers's details in a new window. By default, we offer the following inputs;

• Input Type: The authorisation method that SmartFill will recognise at the system.
• Key / Code: The authorisation code that SmartFill will need to identify at the system.
• Description: A description for the Driver, used to identify during reconcillation.

If you need to add more details for your Vehicle/Plant, learn how to add more columns to your assets.

Once your asset has been configured, press Add to confirm, and the asset will be added to the system.